Restaurant Closing Checks

Rendora Studio
For restaurants and food service businesses training staff on end-of-shift inspections, food safety, equipment checks, and closing procedures.
video script

Hi, I’m James from Oak & Ember. Here’s how to check your station before finishing the closing shift.

First, record the fridge temperature, then use a sanitized probe to check that refrigerated food is at or below 41°F, or 5°C. Sanitize the probe between items. If food is above the limit, label it “Do Not Use,” record the temperature, and notify your supervisor. Don’t return it to service without approval, even if it cools down.

Once food is stored, check preparation surfaces under good lighting for crumbs, grease, or food residue. If anything remains, wash and rinse the surface again before sanitizing. Use the correct test strips to check the sanitizer against the concentration range on its label. Keep the surface wet for the full labelled contact time, then let it air-dry. Don’t wipe it dry with a towel or spray sanitizer over food residue.

After cleaning, follow the approved shutdown procedures for ovens, grills, and fryers. Check that each appliance is switched off, while keeping fridges and freezers running with their doors closed. Report any equipment faults before leaving.

Finally, update your closing checklist and report any unfinished tasks. Once your supervisor approves your station, you’re all set. Thank you for keeping Oak & Ember safe and ready for the next shift!

For You